Items

• 

  "Cary-Gould Style" Compound Microscope

  The Gould-Cary style microscope — when assembled — is case mounted and the pillar screws into the top of the case. The substage mirror is connected via a gimbal and pin which allows for maneuvering to catch the light as well as easy removal from the microscope. The square fixed stage has a small bullseye condenser and specimen clip attached via a pin. The body-tube and objective lenses are attached via a screwing mechanism and can then be attached to the arm. Coarse focusing is controlled by the thumbscrew located next to the stage and uses a rack and pinion mechanism. The mahogany case is fitted and has compartments for the dissembled parts of the microscope. The interior of the lid is lined with blue velvet and the compartments are made from wood. The case is secured by two brass swivel hooks at the front of the case.
• 

  Cary-Gould style Microscope

  The monocular microscope is designed along the Cary-Gould style and mounted on the top of the orginal mahogany case. The compound microscope can be dissembled to fit into the fitted case. The limb is connected to an inclination joint that allows for the microscope to be angled for observation. The square fixed stage has two stage clips connected by pins and are detachable. The body-tube and objective are screwed into each other which is then screwed into the circular arm. The circular arm has a small bullseye condenser connected via a gimbal limb which makes it easy to maneuver. Coarse focusing functions via the sliding mechanism of the stage. The case has compartments lined with velvet to hold the different components of the microscope. The majority of the case has a wooden interior and the case is secured by two brass swing hooks.
• 

  Cary-Gould Pocket Microscope

  The compound microscope is signed by "Cary of London" on the pillar and is made from brass. The microscope can be dissembled to fit into its small, fitted case. The pillar of the microscope is screwed into the front interior of the case. The gimbaled one-sided substage mirror is attached via a pin to the bottom of the pillar. The arm can be secured to the top of the pillar by sliding it into an attachment. Similarly to the substage mirror, the circular stage is attached via a pin into an attachment on the pillar. The fixed stage also has a section for dissecting forceps; however, only the hinge is present with the instrument. The attachment controls the coarse focusing by rack and pinion via a thumbscrew on the side of the microscope. The objective lenses screw into the bottom of the body-tube which is then screwed into the arm of the microscope.The arm was manufactured by UNC Charlotte College of Engineering on March 15, 2010. The mahogany case contains compartments that hold the dissembled parts of the microscope. The interior of the case is lined with worn, purple velvet. Two swinging brass hooks secure the case. 
• 

  "Cary-Gould style" Field Microscope

  The field microscope is made of brass and case-mounted onto a mahogany case which acts as the base. The pillar is secured into the lid of the case via a screw attachment at the bottom of the pillar. The stage is permanently attached to the pillar and coarse focusing functions by a rack and pinion which moves the stage closer or further from the objective. The arm is attached by sliding it into the top section of the pillar where it is secured by a thumbscrew. The objective lens are screwed directly into the end of the body-tube which can then be screwed into the arm. The stage has two clips that hold the specimen by placing the slide between the clip and the square stage. The sub-stage mirror is attached via a pin into the pillar. The mahogany fitted case has some marks and stains. The inside of the case is lined with blue velvet and has compartments to fit the dissembled microscope and accessories. The case is secured by two brass swing hooks on the sides.
• 

  "Cary & Gould" style Microscope

  The "Cary-Gould type" microscope is a common variation of the design. The design came in three sizes and this microscope is considered a "medium." The microscope has a support pillar that screws into the top of the lid. The body-tube is screwed into the arm of the pillar. This design also allows for the microscope to used as a simple microscope by screwing the objectives directly into the arm. The coarse focusing functions via a rack and pinion mechanism which moves the circular stage closer and further away from the objective lens. The circular stage has a under-stage sprung slot which holds the slide and the specimen forceps are attached via a pin. The sub-stage concave mirror is attached via a pin into the support pillar. The microscope can be used as both a compound and simple microscope depending on whether the body-tube or objectives are used respectively. The fitted mahogany case has purple velour-lined interior. The case is closed via two swing hooks, however, one is missing.
• 

  Cary-Gould style Simple Microscope

  The Cary-Gould style microscope is made of lacquered brass. The simple microscope has a circular support pillar that screws into the top of the case, which acts as the base. The coarse focusing is achieved by extending the arm higher or lower via a rack and pinion mechanism. The fixed stage is detachable to fit the microscope into the case and has two stage clips to secure the slides. Unusually, the microscope does not have a substage mirror. The mahogany case is fitted to hold the instrument. The case has sections to hold various accessories, and the inside of the lid is lined with purple velvet. The top of the lid has a brass fixture for the pillar to screw into. The case is secured with two swing clips.